The TR-2 from XFTP by Trilithic is an economical solution ideal for your basic HFC installation needs.

This simple to use meter provides fast and efficient measurements including: signal level measurement, Tilt measurement to balance your system, carrier-tonoise measurements, a voltmeter function and features an extended battery life.

Weighing in at under one pound, this simple to use, rugged little meter has a durable plastic shell and is convenient for one hand operation.

Rent Trilithic TR-2 CATV Signal Level Meter TR-2


46 – 864 MHz Signal Level Measurement
Tilt Measurement to balance your system
Carrier-to-noise measurements
Simple to Use
Long Battery Life
Cost Effective


Single Channel Mode displays the Video level of the selected channel in the channel plan and also displays the frequency and ? V/A.

Single Frequency Mode displays the frequency and level of the audio carrier for the selected channel. Audio is automatically enabled in this mode. The TR-2 can be manually tuned to any frequency(46 – 864 MHz) in steps of 50 kHz, 100 kHz, 1 MHz, 10 MHz, or 100 MHz.

Voltmeter Mode displays the battery voltage and trunk voltage (AC or DC)

Dual Channel Mode displays the video levels of any two selected channels in the plan and at the push of a button displays Tilt between those channels.

Rent TR-2

Tilt mode displays the video level of the first channel in the dual channel mode and the level difference (tilt) between two channels.

C/N Measurement displays video level and performs Carrier to Noise measurement on the selected channel for levels greater than 25 dBmV.


Range: 46 MHz – 864 MHz
Frequency Steps: 50 kHz, 100 kHz, 1 MHz, 10 MHz, 100 MHz
Level Measurement:
Range: -30 to 60 dBmV
Accuracy: ± 2 dB (20°C ± 5 °C)
Resolution: 0.5 dB
Carrier- Noise Ratio (C/N):
Range: 20 dB to 50 dB
Input Signal Range: > 25 dBmV
Measure Accuracy: ± 2.5 dB (20°C ± 5 °C) (shut off the carrier)
Resolution: 0.5 dB

Rent Trilithic TR-2

Input range: 1 to 100 V (AC/DC)
Accuracy: ± 2V
Resolution: 1V
Dimensions: 169 mm X 71 mm X 41 mm (excluding RF connector)
Weight: 0.85 lbs. (386g)
Display: LCD with backlight
Working Temperature: -10°C to 40°C
Audio: Built-in speaker
Built-in Battery: 3.6 V / 2.1 AH Ni-MH battery Work Time: More than 6 hours (full charged battery without audio and LCD backlight).
Charge Time: 10 – 12 hours (power off the meter)

Lease Trilithic TR-2 CATV Signal Level Meter TR-2 Rental