Searcher Plus GT leakage detectors are the first leakage measurement receiver built specifically for systems employing digital set top terminals that cannot tolerate tagged leakage carriers.
Trilithic Searcher Plus GT leakage detector brings you the legacy Searcher Series Leakage Detectors that have been the standard of the Cable Industry for more than 20 years. Today, over 20,000 of these instruments are in daily use by cable systems all over the world to control system leakage, perform government-mandated proof of performance tests, and to identify the small leaks in a systems that may warn of reverse ingress problems. All searcher Series detectors are shipped ready to perform the full range of leakage control applications.
These leakage detectors are ideal for CLI measurements using the Optional AFS series calibrated dipole. When tracking down a leak source on foot, the operator may use the provided flexible rubber antenna or the optional near field probe for close-in inspection and fault diagnosis. An optional lockable vehicle mount, connections to vehicle power and whip antenna configure the Searcher Detector for convenient drive-out operation.
Searcher Plus GT is the first Leakage Measurement Receiver built specifically for systems employing digital set top terminals that cannot tolerate “tagged” leakage carriers. The GT provides enhanced “false alarm” resistance and many of the features of the Super Plus without the use of a tagged leakage test signal.
Testing installations for excessive leakage
Walking down the source of leakage
Near field preventative maintenance measurements
Like Trilithic’s popular Searcher Plus™, the Searcher Plus GT provides calibrated readings in micro Volts/meter (µV/m) for CLI measurements. It is equipped with an audio tone whose pitch varies with the strength of the detected leak. The Searcher Plus GT fits the standard Searcher Plus mobile mount, which connects the Searcher Plus GT to a vehicle antenna and supplies power for operating the unit and charging its batteries.
For safety, the Searcher Plus GT includes a peak hold function that retains the peak reading until it is convenient for the operator to observe the display. Together, these features allow the Searcher Plus GT to be used in the full range of leakage management functions in virtually any environment.